19
$\begingroup$

This is a Heyawake ("divided rooms") puzzle.

Rules of Heyawake:

  • Shade some cells of the grid.

  • Shaded cells cannot be orthogonally adjacent; unshaded cells must be orthogonally connected.

  • There cannot be a horizontal or vertical line of unshaded cells that passes through two borders.

  • If a number is in a room, there must be exactly that many shaded cells in that room.

enter image description here

$\endgroup$
  • $\begingroup$ Does "introductory" here mean that this is intended to be an easy one that experienced puzzlers should leave alone so that relative newcomers have more opportunity? (As opposed to e.g. indicating that it's the first in a series you're going to post, or being a pun whose meaning will become apparent once we see the pattern of shaded squares, or other similarly tricky possibilities.) $\endgroup$ – Gareth McCaughan Aug 15 at 15:32
  • $\begingroup$ @GarethMcCaughan This is a relatively easy one (meant as an introduction to the genre), but I'm not restricting it to any particular solvers. (It's also the first in a series. No puns involved, though.) $\endgroup$ – Deusovi Aug 15 at 16:11
18
$\begingroup$

I think the answer is as follows

enter image description here

Reasoning

The first observation is that the box with the 3 near the top left hand corner can have its cells shaded in only one way. It must be a checkerboard pattern to avoid adjacent shaded cells and we must not trap against an unshaded cell against the edge
enter image description here
Now the cell with the 3 in the bottom left corner can immediately have its cells shaded alternately and no cell in the adjacent box can be shaded since it would either abut an already shaded square or trap an unshaded square. By rule 3 this means that any cell which is two over from the unshaded cells must be shaded like so.
enter image description here
From here, we can immediately colours the cells in the bottom 3-cell in a checkerboard pattern and the adjacent 2-cell must then have its 2nd and 4th cell shaded. Now, the cell above the 2 can be shaded (because below it cannot be). And by rule 3, the cell up-right and two down-right of that must also be. This gives us the following
enter image description here
Now look at the boxes with a 4 in them. The first column of the first must be completely unshaded leaving a 3 by 3 square to shade in a checkerboard pattern. This is the same for the other 4-cell. We cannot use the shading which surrounds an unshaded square so we must have all four shaded squares on the diagonals (the X-shape). Since the ends of these X-shapes are adjacent for the 4-cells, we can guarantee three of the shaded squares in each X. That is, we can shade as follows
enter image description here
We can shade some more squares on the right using rule 3. Then note that the square marked 'x' must be unshaded because, otherwise it would cause an unshaded section at the top to be trapped by shaded squares.
enter image description here
Using this fact and exploiting the 0-cell, we can shade in some more squares using rule 3.
enter image description here
Next we can look at which of the two shading options do we use in the remaining square of the 4-cell. Notice in this next diagram that none of the squares with an 'x' can be shaded. If we wish to satisfy rule 3, one of the two squares above this column must be shaded but if we take the shading choice as marked by the two blue 'A's, we will end up trapping an unshaded region on the left.
enter image description here
Hence, the shading must be as follows
enter image description here
From there, there is only one option for shading the remaining squares in the central 3-cell and we can use repeated applications of Rule 3, while ensuring that the unshaded section at the bottom doesn't become disconnected from the rest, to shade in the rest of the squares.

$\endgroup$
8
$\begingroup$

I believe the answer is

Heyawake

Some deductions:

1: Of the two configurations, this one doesn't isolate a square.
2: Of the two configurations, this one doesn't isolate the square in the box above.
3: This row must be blank to avoid isolating squares in (2), which forces the configuration of the box marked with a 3.
4: Of the two configurations, this one doesn't form an adjacency with (3).
5: These blocks are forced to be shaded by the two-line rule.
At this point, I tackled the 4-boxes above, they clearly needed to be those shapes away from eachother, but the join seemed interchangeable. I assumed that the 4 itself wouldn't be shaded and worked from there to a working answer. Going back it looks like the 4 being shaded would lead to a contradiction, but I am not 100% certain at this juncture.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.