The square and the compass II - Midpoints

Based on The square and the compass

The rules are almost the same. (The only difference is the actual task, marked in bold.)

You have a compass and a pencil but no scale/straightedge. Your job is to mark four points on a plane paper that would form a square if joined. You are given two points on a plane paper. Your job is to find the midpoint of line segment formed by the two points, if joined. Your result has to be perfectly accurate (not approximate) and should be possible in a finite number of moves. The following moves are valid.

• Make the compass radius equal to the distance between two already marked points.
• Draw a circle with any marked point as centre.
• Use any intersection of arcs/circles as a marked point.
• Select a continuous region (either an arc or a 2D region) and mark an approximate point. For example, I could draw an arc and then mark a point that is approximately (but not exactly) at the centre.

I do not know how to solve this.

I do know how to do it in infinite moves, though.

• Would be much easier if the line segment was available as a reference line :) – DrunkWolf Jan 11 '16 at 5:52
• @DrunkWolf Even then, how will you do it? You could post the solution you have in mind as well. – ghosts_in_the_code Jan 11 '16 at 5:54
• Couldn't you just draw a circle center on A with radius AB, and a circle centered on B with radius AB, then go to an intersection between these 2 circles and draw a circle that just touches the line segment, which would be in the middle of the line? – DrunkWolf Jan 11 '16 at 5:57
• @DrunkWolf How will you draw a circle that just touches the line segment? (Your solution is only approximate, not perfectly accurate, as required in the question) – ghosts_in_the_code Jan 11 '16 at 6:00
• Is the point where to circles touch a valid location for a marked point? – Bort Jan 11 '16 at 9:20

I fully copied below answer from https://math.stackexchange.com/questions/227285/constructing-the-midpoint-of-a-segment-by-compass

• I know it is possible, but is there an easy way to divide a segment in half with only a compass? – robjohn♦ May 20 at 3:46
• I don't know if that's "easy", but here's one method:
1. Find the point $C$ on the ray from $A$ through $B$ such that $|AC|=2|AB|$ using my previous comment [The relevant part: "To double the distance along a ray, use the construction of a regular hexagon with vertex $A$ and center $B$".]
2. Intersect the circle with center $C$ through $A$ with the circle with center $A$ through $B$ to find $D_1,D_2$.
3. The midpoint of $AB$ is the second point of intersection of the two circles with center $D_i$ through $A$. – t.b. May 20 at 9:28
• Here is a picture of what I have in mind: - t.b. May 20 at 12:38

The dotted line is not used in the construction.

The triangles $\Delta ACD_1$ and $\Delta AMD_1$ are isosceles by construction and they share a common angle, hence they are similar. Therefore $AM : AB = AM : AD_1 = AD_1 : AC = AB : AC = 1 : 2$.